Allied Telesis x310 Series - Manual (Page 77)

x310 Series Installation Guide for Stand-alone Switches
77
Figure 34. Distances Between the Brackets on the AT-x310-26FP, AT-
x310-50FT, and AT-x310-50FP Switches
The recommended minimum dimensions of the plywood base are listed
here:
 Width: 50.8 centimeters (20 inches)
 Height: 55.9 centimeters (22 inches)
 Thickness: 5.1 centimeters (2 inches)
The dimensions assume the wall studs are 41 centimeters (16 inches)
apart. You may need to adjust the width of the base if the distance
between the studs in your wall is different than the industry standard.
AT-x310-50FT Switch AT-x310-26FP and
AT-x310-50FP Switches