Allied Telesis AT-WA1004G - Manual (Page 84)

Advanced Features
84
Data - Access Control Screen
Group
Group Select the desired Group. The screen will
update to display the settings for the
selected Group. Groups are named “Default,”
“Group 1,” “Group 2,” “Group 3” and “Group
4,” and cannot be renamed.
“Members” Button Click this button to add or remove members
from the current Group.
❏ If the current group is “Default,” then
members can not be added or deleted.
This group contains PCs not allocated to
any other group.
❏ To remove PCs from the Default Group,
assign them to another Group.
❏ To assign PCs to the Default Group, delete
them from the Group they are currently
in. See the following section for details of
the Group Members screen.
Internet Access
Restrictions Select the desired options for the current
group:
❏ None - Nothing is blocked. Use this to
create the least restrictive group.
❏ Block all Internet access - All traffic via the
WAN port is blocked. Use this to create
the most restrictive group.
❏ Block selected Services - You can select
which Services are to block. Use this to
gain fine control over the Internet access
for a group.
Block by Schedule If Internet access is being blocked, you can
choose to apply the blocking only during
scheduled times. (If access is not blocked, no
Scheduling is possible, and this setting has
no effect.)
Define Schedule Button Clicking this will open a sub-window where
you can define or modify the Schedule.