Allied Telesis AT-WA1004G User Manual
Page 21
AT-WA1004G User’s Guide
21
To Clear All Data and restore the factory default values, perform the
following procedure:
1.
Power OFF.
2.
Hold the Reset button down while you power ON.
3.
Keep holding the Reset button for a 5 seconds, until the RED LED
Status, on the front panel, has flashed twice.
4.
Release the Reset button. The Wireless Router is now using the
factory default values.
WAN Port
(10/100Base-T)
Connect the DSL or Cable Modem here. If
your modem came with a cable, use the
supplied cable. Otherwise, use a standard
LAN cable.
Reset Button
This button has two functions:
❏ Reboot. When pressed and released, the
Wireless Router will reboot (restart).
❏ Clear All Data. This button can also be
used to clear ALL data and restore ALL
settings to the factory default values.
Port
Description
- AT-9800 (110 pages)
- AT-2750TX- (2 pages)
- AT-2701FTX (2 pages)
- AT-2451FTX (238 pages)
- AT-WA1104G-10 (99 pages)
- AlliedWare AR440S (53 pages)
- CG-WLBARGS (58 pages)
- AT A35/SX AT-A35-SX/SC (2 pages)
- AT-2750FX/ (2 pages)
- 86222-10 (14 pages)
- AR44x (22 pages)
- CG-WLBARGMO (56 pages)
- AT 2916T AT-2916T (2 pages)
- RG6x4 Series (3 pages)
- AR441S (6 pages)
- AT-2931SX (18 pages)
- AT-2931SX (76 pages)
- AT-2931SX (144 pages)
- AT-2916SX (74 pages)
- AT-2931SX (140 pages)
- AT-2931SX (136 pages)
- AT-AR236E (36 pages)
- AT-AR236E (19 pages)
- 86241-01 (4 pages)
- MiniMAP 9100 (2 pages)
- POTS24 (2 pages)
- 86241-02 (12 pages)
- AT WCP201G AT-WCP201G-001 (2 pages)
- 86251-05 (40 pages)
- ADSL48 (2 pages)
- 210 (8 pages)
- R800 Series (30 pages)
- NETEXTREME II AT-2973T/4 (176 pages)
- AT-WR2304N (67 pages)
- AT-AR750S-dp (5 pages)
- Routers and Switches (15 pages)
- AT-AR300 (36 pages)
- AT AR750S AT-AR750S (5 pages)
- AT-AR441S (5 pages)
- AT-2916SX/ (2 pages)
- 7112 (2 pages)
- AlliedWare NetScreen Routers (12 pages)
- AT-27xx (3 pages)
- AT-WR4500 (264 pages)