Allied Telesis AT-WA1004G - Manual (Page 16)

Introduction
16
❑ Internet Access Log. See which Internet connections have been
made.
❑ Access Control. Using the Access Control feature, you can assign
LAN users to different groups, and determine which Internet
services are available to each group.
❑ VPN Pass through Support. PCs with VPN (Virtual Private
Networking) software using PPTP, L2TP, and IPSec are
transparently supported - no configuration is required.
Wireless
Features
❑ Standards Compliant. The Wireless Router complies with the
IEEE802.11g (DSSS) specifications for Wireless LANs.
❑ Supports both 802.11b and 802.11g Wireless Stations. The
802.11g standard provides for backward compatibility with the
802.11b standard, so both 802.11b and 802.11g Wireless stations
can be used simultaneously.
❑ Speeds to 54 Mbps. All speeds up to the 802.11g maximum of 54
Mbps are supported.
❑ WEP support. Support for WEP (Wired Equivalent Privacy) is
included. Key sizes of 64-bit and 128-bit are supported.
❑ Wireless MAC Access Control. The Wireless Access Control feature
can check the MAC address (hardware address) of Wireless
stations to ensure that only trusted Wireless Stations can access
your LAN.
❑ Simple Configuration. If the default settings are unsuitable, they
can be changed quickly and easily.
LAN Features ❑ 4-Port Switching Hub. The Wireless Router incorporates a 4-port
10/100Base-T switching hub, making it easy to create or extend
your LAN.
❑ DHCP Server Support. Dynamic Host Configuration Protocol
provides a dynamic IP address to PCs and other devices upon
request. The Wireless Router can act as a DHCP Server for devices
on your local LAN and WLAN.
❑ Multi Segment LAN Support. LANs containing one or more
segments are supported, via the Wireless Router's RIP (Routing
Information Protocol) support and built-in static routing table.