Allied Telesis AT-WA1004G - Manual (Page 101)

AT-WA1004G User’s Guide
101
Defining Your
Own Virtual
Servers
If the type of Server you wish to use is not listed on the Virtual Servers
screen, you can define and manage your own Servers:
Note
From the Internet, ALL Virtual Servers have the IP Address allocated
by your ISP.
Connecting to
the Virtual
Servers
Once configured, anyone on the Internet can connect to your Virtual
Servers. They must use the Internet IP Address (the IP Address allocated
to you by your ISP).
For example:
http://203.70.212.52
ftp://203.70.212.52
It is more convenient if you are using a Fixed IP Address from your ISP,
rather than Dynamic. However, you can use the Dynamic DNS feature,
described in the following section, to allow users to connect to your
Virtual Servers using a URL, rather than an IP Address.
Create a new Server: 1. Click “Clear Form”.
2. Enter the required data, as described
above.
3. Click “Add”.
4. The new Server will now appear in the list.
Modify (Edit) a
Server: 1. Select the desired Server from the list.
2. Make any desired changes (for example,
change the Enable/Disable setting).
3. Click “Update” to save changes to the
selected Server.
Delete a Server: 1. Select the entry from the list.
2. Click “Delete”.
Note: You can only delete Servers you have
defined. Pre-defined Server cannot be deleted.