Allied Telesis AT-WA1004G - Manual (Page 129)

AT-WA1004G User’s Guide
129
General Problems
Cannot connect to the Wireless Router to configure it.
Check the following:
❑ The Wireless Router is properly installed, LAN connections are OK,
and it is powered ON.
❑ Ensure that your PC and the Wireless Router are on the same
network segment. (If you don't have a router, this must be the
case.)
❑ If your PC is set to “Obtain an IP Address automatically” (DHCP
client), restart it.
❑ If your PC uses a Fixed (Static) IP address, ensure that it is using an
IP Address within the range 192.168.0.2 to 192.168.0.254 and thus
compatible with the Wireless Router's default IP Address of
192.168.1.1. Also, the Network Mask should be set to
255.255.255.0 to match the Wireless Router.
In Windows, you can check these settings by using Control Panel-
Network to check the Properties for the TCP/IP protocol.