Allied Telesis AT-WA1004G - Manual (Page 62)

PC Configuration
62
Linux Clients
To access the Internet via the Wireless Router, it is only necessary to set
the Wireless Router as the “Gateway”.
Ensure you are logged in as “root” before attempting any changes.
Fixed IP Address
By default, most Unix installations use a fixed IP Address. If you wish to
continue using a fixed IP Address, make the following changes to your
configuration.
❑ Set your “Default Gateway” to the IP Address of the Wireless
Router.
❑ Ensure your DNS (Name server) settings are correct.
To act as a DHCP Client (recommended)
The procedure below may vary according to your version of Linux and X
-windows shell.
1. Start your X Windows client.
2. Select Control Panel the Network.
3. Select Interface for your Network card. Normally, this will be called
eth0.
4. Click Edit, set the “protocol” to “DHCP”, and save this data.
5. To apply your changes:
— Use the “Deactivate” and “Activate” buttons, if available.
— OR, restart your system.