Allied Telesis AT-WA1004G - Manual (Page 64)

PC Configuration
64
Wireless Station Configuration
This section applies to all Wireless stations wishing to use the Wireless
Router's Access Point, regardless of the operating system which is used
on the client.
To use the Wireless Access Point in the Wireless Router, each Wireless
Station must have compatible settings, as follows:
Mode The mode must be set to Infrastructure.
SSID (ESSID) This must match the value used on the
Wireless Router. The default value is default.
Note: The SSID is case sensitive.
WEP By default, WEP on the Wireless Router is
disabled.
❏ If WEP remains disabled on the Wireless
Router, all stations must have WEP
disabled.
❏ If WEP is enabled on the Wireless Router,
each station must use the same settings
as the Wireless Router.