Samsung GT-P3113TSYXAR - Manual (Page 97)

Connections 92
Scanning and Connecting to a Wi-Fi Network
When you turn on Wi-Fi, your device searches for available
Wi-Fi connections, then displays them on screen.
1. From any screen, touch the Time in the Status Bar.
The Status Details displays.
2. Touch Wi-Fi to turn Wi-Fi On. Your device automatically
scans for available Wireless Access Points.
3. When the scan is complete, touch a Wi-Fi network to
connect. If the Wi-Fi network is open, your device
automatically connects. If the Wi-Fi network is
secured, enter the password at the prompt to connect.
Adding a Wi-Fi Network Manually
1. From a Home screen, touch Apps
➔ Settings.
2. Under Wireless and network, on the Wi-Fi tab, touch the
OFF / ON icon to turn Wi-Fi on.
3. Touch Add network, then enter network information:
• Network SSID: Enter the name of the Wi-Fi Wireless Access
Point (WAP).
• Security: Select the type of security used by the WAP.
Note: Depending on the Security protocol used by the WAP,
additional network information may be required, such as
a Password.
• Password: If the WAP is secured, enter the password or hex
key.
4. Touch Save to save the settings.
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
1. From a Home screen, touch Apps ➔ Settings
➔ More settings ➔ Wi-Fi Direct.
2. Touch the OFF / ON icon to turn Wi-Fi Direct
on.
If you are currently connected to a Wi-Fi network, a
prompt displays Start Wi-Fi Direct operation. This will
turn off Wi-Fi client/hotspot operation.
3. Touch OK to continue.
Your device will begin to search for other devices
enabled with Wi-Fi direct connections.