Samsung SGH-T759ZPBTMB - Manual (Page 176)

171
Wi-Fi
About Wi-Fi
Wi-Fi (short for "wireless fidelity") is a term used for certain
types of Wireless Local Area Networks (WLAN). Wi-Fi
communication requires access to an existing and accessible
Wireless Access Point (WAP). These WAPs can either be Open
(unsecured) as within most Hot Spots, or Secured (requiring
knowledge of the Router name and password).
Note: After you complete a connection to an active Wi-Fi network, the Wi-Fi
Calling feature will automatically be enabled. For more information,
refer to “Wi-Fi Calling” on page 57.
Activating Wi-Fi
By default, your device’s Wi-Fi feature is turned off (deactivated).
Activating Wi-Fi allows your device to discover and connect to
compatible in-range WAPs (Wireless Access Points).
1. Press ➔ and then tap (Settings) ➔
Wireless and network ➔ Wi-Fi settings.
2. Tap Wi-Fi to activate the feature. A checkmark indicates
that Wi-Fi is active. The device scans for available in-range
wireless networks and displays them under Wi-Fi networks
on the same screen.
Connecting to a Wi-Fi Network
1. Press ➔ and then tap (Settings) ➔
Wireless and network ➔ Wi-Fi settings.
The network names and security settings (Open network or
Secured with WEP) of detected Wi-Fi networks display in
the Wi-Fi networks section.
2. Tap the network you wish to connect to.
Note: When you select an open network you are automatically connected.
3. Enter a wireless password (if necessary).