Advanced recording, Handling menus and q.menus, Using the q.menu button – Samsung HMX-M20BN-XAA User Manual
Page 59: Using the menu ( ) tab, Open the lcd screen to turn on the camcorder, Touch the menu ( ) tab on the touch panel, Touch “ shutter
55
• Some menu items listed on the menu or Q.Menu can not be used at the same time, or may be
grayed out.
• For more information, see the Troubleshooting pages, “134~137.”
• To make the procedures described above easy to understand, all the menu setting examples on
this page are based on the simplest setting methods.
Menu setting methods can differ, depending on the menu options you have chosen.
advanced recording
HANDLING MENUS AND Q.MENUS
Follow the instructions below to use each of the menu items listed in this manual.
This chapter uses the “Shutter,” and “Focus” functions of the video record mode as examples.
1.
Open the LCD screen to turn on the camcorder.
• If you find the LCD screen is already open and the power is turned off,
press the power (
) button to turn on the camcorder.
2.
Select the Video (
) or Photo (
) mode by pressing the MODE
button.
3.
Press the Q.MENU button on your camcorder to see the
available menu options. The quick menu screen appears.
4.
Touch “Focus.”
5.
Touch the desired option.
• Adjust the setting values accordingly.
• To exit the menu, touch the Exit (
) or Return (
) tab.
Using the Q.MENU button
1.
Open the LCD screen to turn on the camcorder.
• If you find the LCD screen is already open and the power is turned off,
press the power (
) button to turn on the camcorder.
2.
Select the Video (
) or Photo (
) mode by pressing the MODE button.
3.
Touch the Menu (
) tab on the touch panel.
• The menu screen appears.
• To change the current page, touch up (
)/down (
) tab.
4.
Touch “Shutter.”
• Some functions cannot be used at the same time. If there is a conflict,
a message appears telling you that the related function will be changed
or disabled. Touch “Yes,” to change or disable the related function
setting, and then continue to set the function values.
5.
Touch the desired option. Adjust the setting values accordingly.
• To exit the menu, touch the Exit (
) or Return (
) tab.
Using the MENU (
) tab
Resolution
EV
Back Light
Focus
Menu(
) tab
Q.MENU button
MODE
CHG
Q. MENU
STBY
00:00:00
[80Min]
85
MIN
2 / 6
85
MIN
3D-NR
조리개
셔터
노출 보정
0
The following setting will be
changed. Continue?
[ Super C.Nite
]
YES
NO
AUTO
Auto
Manual
1 / 1
Focus
Touch Point
2 / 7
85
MIN
White Balance
Aperture
EV
Shutter
0