Samsung HMX-M20BN-XAA - Manual (Page 39)

OPEN
35
1. Open the battery/memory card cover by
sliding the battery/memory card cover
switch towards
① .
2. Insert the memory card into the card slot
until it softly clicks.
• Make sure that SD/SDHC Card logo is
facing up and the camcorder is placed
as shown in the figure.
3. Close the battery/memory card cover by
sliding the battery/memory card cover
switch in the direction of
② .
1. Open the battery/memory card cover by
sliding the battery/memory card cover
switch towards
① .
2. Gently push the memory card to eject it.
3. Close the battery/memory card cover by
sliding the battery/memory card cover
switch towards
② .
getting ready to start recording
INSERTING AND REMOVING A MEMORY CARD (NOT SUPPLIED)
Your camcorder supports only SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards.
Card compatibility with the camcorder may vary depending on the manufacturer and the type of
memory card.
• To avoid data loss, turn off the camcorder by pressing the power ( ) button for one second
before inserting or ejecting the memory card.
• Do not format the memory card on a PC.
• Do not remove the power supply (battery pack or AC adaptor) during operations such as recording,
playback, formatting, deleting, and editing. Doing so may damage the storage media or data.
• Do not eject a memory card when it is in operation. Doing so may damage the memory card or
data.
• Be careful not to push the memory card too hard. The memory card may suddenly pop out.
To insert a memory card To eject a memory card
❷ ❶