Samsung HMX-M20BN-XAA - Manual (Page 126)

122
1. Turn on your camcorder, and then touch the Play ( ) tab.
• Set “TV Type” according to the display device page 102
• Touch Menu ( ) Setting ( )tab “Analog TV Out” “Composite.” page 103
2. Insert the recording media into the recording device.
• If your recording device has an input selector, set it to the input mode.
3. Connect your camcorder to the Composite video and audio input connections of the
recording device (VCR or DVD/HDD recorder) with the supplied component/AV cable.
• Make sure to connect to both the video and audio input jacks.
4. Start the playback on your camcorder, and then record it on the recording device.
• Refer to the instruction manuals supplied with your recording device for details.
5. When dubbing is finished, stop the recording device, and then your camcorder.
• Refer to the instruction manuals supplied with your recording device for details.
• You can dub videos recorded on this camcorder by connecting it to other recording devices
using the supplied component/AV cable. The camcorder dubs all recorded videos in SD
(standard definition) image quality, regardless of the recording resolution (HD/SD).
• You cannot dub using an HDMI cable.
• To copy a video recorded in HD (high definition) image quality, use the built-in software of your
camcorder to copy the HD video to a computer.
• Becasue the camcorder dubs via analog data transfer, the copy’s image quality may be lower.
• To hide the screen indicators (such as the counter, etc.) on the screen of the connected monitor
device, set “TV Display: Off.” page 103
• To record the date/time in the copy, display it on the screen. page 102
• When you are connecting your camcorder to a monaural device, connect the green plug of the
component/AV cable to the video input jack, and the red (right channel) or the white (left channel)
plug to the audio input jack on the device.
dubbing videos
DUBBING TO VCR OR DVD/HDD RECORDERS
You can dub videos from you camcorder to other recording devices, such as VCRs or DVD/HDD recorders.
When dubbing, connect your camcorder to a wall outlet using the supplied AC power adaptor to ensure a
continuous supply of power. Refer to the instruction manuals supplied with the devices you are dubbng to for
connection instructions.
PRECHECK!
The camcorder dubs via analog data transfer (composite connection). Use the supplied component/AV cable.
S-VIDEO IN
L R
AUDIO IN VIDEO IN
MODE
CHG Q. MENU
DC IN
Camcorder
Signal flow
Component/AV cable
VCR or DVD/HDD recorder