beautypg.com

Demo, Anynet+ (hdmi-cec), System setting – Samsung HMX-M20BN-XAA User Manual

Page 108

background image

104

1.

Touch the Menu (

) Setting ( ) tab “Demo” “On.

• If you don't want this function, touch “Off.

2.

To exit the menu, touch the Exit ( ) or Return (

) tab.

• The Demo function starts on the LCD screen.

Demo

Demo mode automatically shows you the major functions of your camcorder so that you can use them more
easily.

Submenu items

Off :

Disable the function.

On: Enable

s the Demo function.

1.

Touch the Menu (

) Setting ( ) tab “Anynet+ (HDMI-CEC).

2.

Touch a desired submenu item.

3.

To exit the menu, touch the Exit ( ) or Return (

) tab.

• When the camcorder is connected to the Anynet+ supported

TV, you can operate some functions of the camcorder using
the TV’s remote control.

Anynet+ (HDMI-CEC)

This camcorder supports Anynet+. Anynet+ is an AV network system that lets you control all connected
Samsung AV devices with an Anynet+ supported Samsung TV remote control.

Submenu items

Off: Disable the fun

ction.

On: The Anynet+ functio

n is enabled.

• When you turn on the camcorder and it is connected to an Anynet+ supporting TV with an HDMI

cable, the Anynet+ supported TV automatically turns on. If you do not want to use this Anynet+
function, set “Anynet+ (HDMI-CEC)” to “Off.

• For details about Anynet+ (HDMI-CEC), refer to the user manual of the Samsung Anynet+

supported TV.

• The Demo function does not operate in the following case:

- If

Auto Power Off” is set to “5 Min” and you are using the battery as the power source, the

Auto Power Off function operates before Demo can start.

Using the Demo function
• The Demo mode is Canceled in the following cases:

- If the LCD screen is touched.
- If you press any button (Recording start/stop, Q.MENU, display (

)/ CHECK, SMART AUTO,

MODE, PHOTO, etc.). However, the camcorder enters the Demo mode automatically after
5 minutes in STBY mode if it is idle for 5 minutes without an operation. If you don’t want the
Demo function to start in that fashion, set “Demo” to “Off.

system setting

7 / 7

Language

Anynet+ (HDMI-CEC)

Demo

85
MIN

7 / 7

Language

Anynet+ (HDMI-CEC)

Demo

85
MIN