Samsung SCH-R400ZPAMTR - Manual (Page 30)

30
Adjust the Ringer
1. In standby mode, press the Volume key ( ) on the left side of the phone up
or down. Options are:
2. Press once you’re satisfied with the setting. The phone returns to
standby mode.
Tip: You can also enter the Volume / Voice Calls sub-menu by pressing the Menu key ( ), then
pressing the , , , and keys. Use the Volume key on the left side of your phone
to adjust the call ringer setting.
Note: The Vibrate icon ( ) appears in the display when the call ringer is set to Vibrate. The Vibrate/Ring
icon ( ) appears in the display when the call ringer is set to Vibrate/High.
Call Answer
Select from three methods for answering calls. This option can be changed in the
Settings menu.
1. In standby mode, press the MENU key ( ), then press (for
Settings), (for Call Settings), and for Call Answer. The
following options appear in the display:
• Any Key — Pressing any key except or answers a call.
• Send Key — Only pressing answers a call.
• Slide Up — Opening the phone’s slide or pressing answers a call.
2. Use the navigation keys to highlight the Call Answer option of your choice.
3. Press to activate the method for answering calls.
Call Waiting
If you’re on a call, your phone beeps when another call is incoming. Contact your
Wireless Carrier for availability.
1. Press to connect and ask the calling party to remain on the line.
2. Press and the second caller is placed on hold and you’re returned to
the original caller.
3. Press to alternate between calls.
• Ringer Off • Medium
• Vibrate • Medium/High
• Low • High
• Low/Medium • Vibrate/High
OK
OK
@ @
OK
@
END
SEND
SEND
OK
SEND
SEND
SEND