Samsung SCH-R400ZPAMTR - Manual (Page 102)

102
Quality — Indicates the current photo Quality setting (Fine
shown).
White Balance — Indicates the current photo White Balance
setting (Auto shown).
Self Timer — Delays the camera shutter by either 2, 5, or 10
seconds after you press the key.
Multi Shot — Automatically or manually takes multiple
pictures in Divided format ( ) or in Series format
( ) after you press the key.
Camera Shortcuts
You can use the Navigation Keys to quickly access both the Brightness and Zoom
capabilities of the built in camera. When you exit the camera mode, all camera
settings return to default values.
Brightness
1. In camera mode, change the brightness of your pictures using the Up and
Down navigation keys. Options are +4 – -4.
2. Press the key to take the picture.
Zoom in on a Subject
Your camera has digital zoom capabilities of up to x9 with Resolution set to 640x480
or lower.
Note: Pictures may appear somewhat grainy as you zoom in; this is a normal result of digital enhancement.
Note: The Zoom setting is affected by the Resolution setting (camera mode). With Resolution set to
1280x960, no zoom is available. With Resolution set to 640x480 and lower, Zoom settings 0 – 9 are
available.
1. In camera mode, press the Left and Right navigation keys to zoom in and
out on your subject.
2. Press the key to take the picture.
Camera Options
The Camera Options let you temporarily override your default camera settings. Any
settings you change using the Camera Options only apply to the current camera
session or until you make another change using the Camera Options.
OK
OK
OK
OK