Samsung SCH-R400ZPAMTR - Manual (Page 113)

Tools 113
Accessing Your Phone’s Tools
Accessing Your Phone’s Tools
To launch the Tools menu:
ᮣ In standby mode, do one of the following:
• Press the MENU key ( ), then press for Tools.
• Press and hold until the phone prompts, “Say a command”, then say
“Go To Tools” into the microphone. (For other methods of launching
VoiceSignal, see “Voice Launch” on page 97.)
The Tools menu appears in the display.
Bluetooth
Bluetooth is a short-range wireless communications technology capable of
exchanging information over a distance of about 30 feet without requiring a physical
connection.
Unlike infrared, you don't need to line up the devices to beam information with
Bluetooth. If the devices are within a range of one another, you can exchange
information between them, even if they are located in different rooms.
The Bluetooth wireless technology settings menu provides the ability to view and
change the device name, show the visibility, and set the security for the device.
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth features available. When
the Bluetooth is turned off, you cannot send or receive information via Bluetooth. To
save battery life or in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology headset.
Add New Device
To search for available Bluetooth devices:
1. From the Tools menu, press for Bluetooth. The following options
appear in the display:
• Add New Device
• Registered List
• Bluetooth Settings
2. Highlight Add New Device and press the key.
If Bluetooth is off, you are prompted to “Turn Bluetooth on?”. Press the Yes
(left) soft key (
) to turn Bluetooth on.
Note: Press the No (right) soft key ( ) to leave Bluetooth off and return to the Bluetooth sub menu.
OK
@
OK