beautypg.com

Emergency, N, see “emergency – Samsung SCH-R400ZPAMTR User Manual

Page 137

background image

Settings

137

Phone Settings

2.

Enter the four-digit lock code using the keypad.

Note: The default lock code is the last four digits of your mobile phone number.

The “New Lock Code” prompt disappears and the Security menu appears
in the display.

3.

Press

for

Change Lock. You’re prompted to enter the New Lock

Code.

4.

Enter the New Lock Code. You’re prompted to re-enter the New Lock Code
for verification.

5.

Enter the new lock code again. Your changes are stored.

Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the

lock code, be sure to write down or memorize the new code.

Emergency #

You have the option of storing up to three emergency numbers to your phone. Each
number can be up to 32 digits in length. All emergency numbers can be dialed any
time, even when your phone is locked or restricted.

Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even

when the phone is locked or restricted. If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.

Important!: Because of various transmission methods, network parameters, and user settings used to

complete a call from your wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at all times.

Important!: DO NOT depend on this phone as a primary method of calling 911 or for essential or

emergency calls.

Remember to always turn your phone on and check for adequate signal strength
before placing a call.

Note: When you dial an emergency number, you phone locks itself to the emergency location that answered

the call and locks itself in 911-Only mode, blocking from dialing any number but an emergency
number.

This manual is related to the following products: