Alert notification, Vibrate all, Silence all – Samsung SPH-M540ZPASPR User Manual
Page 71
Se
ttin
g
s
55
3.
Use the navigation key to select
Use Ringer Volume
(to use the ringer volume setting).
– or –
Use the navigation key to select
Separate Volume
(to use a volume setting that is different from the
ringer volume setting).
4.
If you select
Separate Volume
, press
Vibrate
(left softkey) if you wish the phone to vibrate in
addition to ringing at the selected volume setting.
5.
Press
to store your new settings.
Alert Notification
Set your phone to alert you with an audible tone when
you change service areas, once a minute during a
voice call, or when a call has been connected.
1.
Select
and press
>
Settings > Sounds >
Alerts
.
2.
Select
Minute Beep
,
Service
,
Connect
,
Signal Fade/Call
Drop
,
Power On
, or
Power Off
and press
.
3.
Select
On
or
Off
and press
.
Vibrate All
The Vibrate All option allows you to mute all sounds
and activate the vibration feature for all activities without
turning your phone off.
To activate Vibrate All:
ᮣ
Press and hold the volume button down in standby
mode until the screen displays “Vibrate All.”
To deactivate Vibrate All:
ᮣ
Press the volume button up repeatedly to select a
volume level.
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
To activate Silence All:
ᮣ
Press and hold the volume button down in standby
mode until the screen displays “Silence All.”
Sprint M540.book Page 55 Tuesday, April 7, 2009 3:38 PM