Samsung SEC-R350WRAMTR - Manual (Page 87)

Tools 84
• Select the alarm clock you
wish to set, then press
EDIT.
The selected Set Alarm
screen appears in the
display.
2. Press the Navigation
key Up/Down to
highlight Set Alarm
options.
3. Press the Navigation key Left/Right to set the alarm On.
4. To set the Time:
• Enter the time for the alarm using the keypad.
• Press the Navigation key Left/Right to select AM or PM.
5. Press the Navigation key Left/Right to select the
Frequency at which you wish the alarm to occur (Daily,
Mon.-Fri., Weekends, or Once).
6. Use the Navigation key to select the Ringer type (Tone,
Vibrate, Light Only) and ringtone (from My Ringtones).
7. When you’re finished entering the time and frequency for
the alarm, press SAVE. If the alarm is set to On, the alarm
icon (
) appears in the top of the display.
When an Alarm Sounds
An animated alarm clock appears in the display along with
Snooze and Dismiss options and an alert sounds when the
specified time for the alarm arrives.
• To silence the alarm, use the Navigation key to highlight Snooze or
Dismiss and press .
• If the alarm was set as a Daily alarm, the alarm icon remains in the top
of the display.
• If the alarm was set as a Once only alarm, the alarm icon disappears
from the top of the display.
Turn On/Off, Add, or Erase an Alarm
1. From the Tools menu, select Alarm Clock.
2. Highlight the desired alarm (if any), then press Options.
The following options appear in the display:
• On / Off — Enables/disables the highlighted alarm without
changing the settings.
• Add new alarm — Lets you add an alarm.
• Erase this alarm — Deletes the highlighted alarm.
• Erase all — Deletes all alarms.
3. Select the desired option.