Samsung SGH-T499MAWTMB - Manual (Page 126)

122
To change your Bluetooth name:
1. Verify Bluetooth is active.
2. From the Bluetooth settings page, tap Device
name.
3. Enter a new name.
4. Tap OK to complete the rename process.
To set visibility:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Visible.
Making your device visible allows other devices
to pair and communicate.
Note: Your device is visible for up to 120 seconds (2 minutes).
This value appears as a countdown within this field.
To scan for Bluetooth devices:
1. Verify Bluetooth is active.
2. From the Bluetooth settings page, tap Scan
devices to search for visible external Bluetooth-
compatible devices such as headsets, devices,
printers, and computers.
Pairing Bluetooth Devices
The Bluetooth pairing process allows you to establish
trusted connections between your device and another
Bluetooth device. When you pair devices, they share a
passkey, allowing for fast, secure connections while
bypassing the discovery and authentication process.
Note: Pairing between two Bluetooth devices is a one-time
process. Once pairing is established the devices continue
to recognize their partnership and exchange information
without entering a passcode.
To pair your device with another Bluetooth device:
1. Verify Bluetooth is active.
2. From the Bluetooth settings page, tap Visible.
Your device must be visible to successfully pair
with an external device.
3. Tap Scan devices. Your device displays a list of
discovered in-range Bluetooth devices.
4. Tap a device from the list to initiate pairing.
5. Enter the passkey or PIN code, if needed, and
tap OK.
6. The external device must accept the connection
and enter your device’s PIN code.
Once successfully paired to an external device,
displays in the Status area.