Campbell Scientific PC400 Datalogger Support Software User Manual
Page 241
Appendix C. Log Files and the LogTool Application
TABLE C-1. Transaction Log Messages
Code
Message Text
Message Parameters
Message Meaning
User Response to
Message
65
Device restore
from file failed
On server startup a
device in the network
map could not be
restored.
This is an indication
that the configuration
file has been corrupted.
Check the network map
and the computer file
system.
66
Device save to
file succeeded
The update to the
device configuration
file was successful.
67
Device save to
file failed
The update to the
device configuration
file failed.
This may be due to a
problem with directory
permissions or a
corrupted directory.
68
Packet delivery
failed
Fault code:
1. Incompatible BMP1
device or malformed
packet
2. Routing failure
{unrecognized station
number}
3. Temporarily out of
resources
4. Link failure
This is a message
from the RF base
indicating that a
BMP1 message
didn’t make it to the
data logger.
Codes 1 and 3 are rare.
If ever seen contact an
application engineer at
Campbell Scientific.
Code 2 indicates that
the RF base has lost the
network map and
doesn’t know how to
route the message. The
server automatically
resends the network
map.
Code 4 is an indication
that the RF base was
not able to
communicate with the
RF modem attached to
the datalogger. These
will happen
occasionally as part of
normal operations.
Frequent occurrences
indicate that the radio,
antenna, connectors and
RF link be reviewed.
C-7