Campbell Scientific PC400 Datalogger Support Software - Manual (Page 151)

Section 8. Datalogger Program Creation with Edlog
Toolbar
Open a new file.
Save the current file to disk and optionally precompile the
program.
Index the parameter that is selected (for information on
indexing, refer to your datalogger operator’s manual).
Invoke the input location editor (for a discussion on input
locations and the Editor, see Section 8.2, Input Locations).
Display the input location list; allows the user to select and
insert an input location automatically into a parameter.
Invoke the final storage label editor (for more information
on editing final storage labels see Section 8.3, Final Storage
Labels).
Assign a parameter a star 4 value (for information on star 4
values, refer to your datalogger operator’s manual).
Open the on-line help system.
8.1.5.2
8.1.5.3
Renumbering the Instructions
When Automatic Renumbering is enabled, the instructions are automatically
renumbered whenever instructions are inserted or deleted. By default,
Automatic Renumbering is enabled. Automatic renumbering can be turned off
by selecting Options | Editor if you have a very large program and auto
renumbering is slowing down editing. If automatic renumbering is disabled,
you can manually renumber the instructions by selecting Display | Renumber.
Compress VIEW
When Display | Compress is selected, only the first line of each instruction is
displayed. The compressed view makes it easier to see the program structure
and to move around in the program.
8-15