Campbell Scientific PC400 Datalogger Support Software - Manual (Page 239)

Appendix C. Log Files and the LogTool Application
TABLE C-1. Transaction Log Messages
Code Message Text Message Parameters Message Meaning User Response to
Message
36 Logger table
definitions have
changed The server has
detected a change in
the table definitions
in the datalogger.
A change in table
definitions indicates
that the datalogger
program may have
changed. Before
updating table
definitions make sure
the needed data in the
data cache has been
saved to a file if
desired.
40 Datalogger
message Severity (S for Status, W
for Warning, F for Fault);
Message text. This is a message that
has been generated
by the datalogger (or
in some cases the RF
base on behalf of the
datalogger). Datalogger warning and
fault messages should
be investigated using
the datalogger operators
manual or contacting an
applications engineer at
Campbell Scientific.
41 Records
received Table name; Beginning
record number; Ending
record number Datalogger records
have been received
and stored in the data
cache.
42 A datalogger
transaction has
timed out Time out period in
milliseconds The server has waited
longer than the
allotted time for the
expected response to
a transaction. Determine the reason
for the timeout. This is
usually due to a
problem with the
communications path
between the PC and the
datalogger.
43 Terminal
emulation
transaction
started Terminal emulation
message has been
sent to the
datalogger.
44 Terminal
emulation
transaction
complete Terminal emulation
response message has
been received from
the datalogger.
45 Terminal
emulation
transaction
failed The expected
terminal emulation
response from the
datalogger was not
received.
46 Set variable
started The message to set an
input location, flag or
port has been sent to
the datalogger.
47 Set variable
complete The datalogger has
acknowledged the set
of an input location,
flag or port.
C-5