Campbell Scientific CS135 Lidar Ceilometer - Manual (Page 49)

User Guide
41
h2 (5 characters) = 2nd Height
If detection status is 2, 3 or 4 h2 = Second highest cloud base reported
If detection status is 5 h2 =
H ighest signal received
If detection status is 0, 1, or 6 h2 = "/////"
h3 (5 characters) = 3rd Height
If detection status is 3 or 4 h3 = Third highest cloud base reported
If detection status is 0, 1, 2, 5 or 6 h3 =
"/////"
h4 (5 characters) = 4th Height
If detection status is 4 h4 = Highest cloud base reported
If detection status is 0, 1, 2, 3 or 5 h4 = "/////"
flags (12 characters in 3 groups of 4, space separated) = Alarm or warning information.
Refer to Message 001 for a breakdown of the flags.
CR LF = Carriage Return + Line Feed.
LINE 3
__d_h1h1h1__d2_h2h2h2__d3_h3h3h3__d4_h4h4h4__d5_h5h5h5 CR LF
(note spaces)
where
d (1 character) = Data available
0 to 8 Amount of lowest layer in oktas
9 Vertical visibility only available
-1 No sky condition data available
99 Insufficient data
h1h1h1 (3 characters) = Height of the lowest cloud layer in 10s of metres or 100s of feet
d2 (1 character) = Cloud amount of the 2nd layer in oktas
h2h2h2 (3 characters) = Height of the 2nd cloud layer in 10s of metres or 100s of feet, if no 2nd
layer is reported h2h2h2 = '///'.
d3 (1 character) = Cloud amount of the 3rd layer in oktas
h3h3h3 (3 characters) = Height of the 3rd cloud layer in 10s of metres or 100s of feet, if no 3rd
layer is reported h3h3h3 = '///'.
d4 (1 character) = Cloud amount of the 4th layer in oktas
h4h4h4 (3 characters) = Height of the 4th cloud layer in 10s of metres or 100s of feet, if no 4th
layer is reported h4h4h4 = '///'.
d5 (1 character) = Cloud amount of the 5th layer in oktas
h5h5h5 (3 characters) = Height of the 5th cloud layer in 10s of metres or 100s of feet, if no 5th
layer is reported h5h5h5 = '///'.