beautypg.com

3 led indicator – Campbell Scientific CS135 Lidar Ceilometer User Manual

Page 37

background image

User Guide

29

If the switch is pushed for four seconds the CS135 will reboot in exactly the same
way as the REBOOT terminal command. If it is held closed while the CS135 is
powered off and on again it will return to factory defaults. Note that to power
cycle the CS135 the battery has to be disconnected as well as switching the main
power off and on.

Fig 5.1 Restoring Factory Defaults

Opening the access door MUST be carried out by a competent
person.

5.3 LED Indicator

Figure 5.2 LED indicator

NOTE