Campbell Scientific CC5MPX and CC5MPXWD Digital Network Cameras - Manual (Page 48)

Section 7. Camera Operation Using Web Browser Interface
7-12
7.3.2 Automatic Date and Time Update
The Automatic Date and Time sub menu (see FIGURE 7-11) configures the
camera for automatic date and time updates. The setting parameters are as
follows:
• Time Variance in Seconds to Perform clock update
Select the minimum allowable variance that will result in the camera’s
time being changed.
• Source
Select one of 3 options for the Automatic Time updates. The possibilities
are:
o None
The camera’s clock is highly accurate and its drift is normally less
than 2 minutes per year.
o PakBus Port
Normally this is a datalogger. The actual time update occurs only
when a file transfer occurs to the datalogger from the camera
o SNTP Server.
The camera will use the SNTP Time server that is specified under
Network settings (see SNTP (TIME) Server Setting). A proper
Network connection is required as well.
FIGURE 7-12. Automatic Date and Time Update
7.3.3 Site Name
The Site Name sub menu (see FIGURE 7-13) allows a site name to be used for
the web page headings. By default the Site Name is set to Campbell Scientific.
This is useful in providing an easy way of confirming the camera that you are
connected to in the web interface. The Site Name is limited to 32 characters.
Refer to FIGURE 7-14 for the location of the Site Name on the web pages.