Flytec 5030 v2.24 * - Manual (Page 35)

Flytec
5030 GPS
3.4 Routes Set - Delete - Alter
You reach any stored routes by marking the menu point Routes in the Main Setup Menu.
Routes saved in the Flytec 5030 GPS appear after pressing the Enter key again. (Maximum
of 20 routes) From these you can select one of the routes to be deleted by using the
and
keys; press F2 (DeI.-Route) to delete or Enter key to alter. However, by pressing the Fl
key (Ins. Route) a new route can be created.
A route is a string of waypoints. (Of course the WPs have to be already in the Flytec 5030
GPS's memory). If a WP is used in a route, then it can no longer be deleted.
Setting a New Route
After pressing the F1 key (lns.Route), first a name has to be entered for the route. The
cursor will blink on the first letter of the word “Xxxxx”. By using the
and keys you
alter each to the desired letter. By using the key you proceed to the second letter,
change it, and so forth. By pressing the Enter key you conclude the entry of the route name.
At this time the individual WPs need to be added. The list of the available WPs appears in a
alphabetical order in the bottom half of the screen after pressing the F1 button (lns.Wayp). At
the same time you see the request: Select Waypoint No1. Again by using the
or
keys you search for the first WP and it is added to the route by pressing Enter. This is
indicated in the upper half of the screen. Press the F1 key (Ins.Wayp) again. Once more the
waypoint list appears and you can select the second point. Press Enter to add this to the
route, and so on. The highlighted waypoint (offset in black) in the route is always the last
one entered, which means that the function “lns.WP” will set the next WP to be entered after
the one highlighted in black. If you want to insert an additional waypoint after WP1, then you
highlight WP1, press the Fl key (lns.WP); the reference Select Waypoint No 2 appears.
If you determine, for example, that Waypoint No. 4 must be changed, then you select it and
delete it( with F2 ) and insert a new one by pressing F1 . Note: The marked WP before
pressing F1 must be WP3. Again the list of available waypoints appears and the prompt
Select Waypoint No 4. After selecting and pressing Enter, the old waypoint is replaced by
the newly chosen one.
If you want to delete a waypoint from the route, then you select it and press the F2 key (Del.
Wayp) The WP is deleted from the list without any additional prompt.
Altering a Route:
You select a route to be changed with the
or keys and confirm with Enter. The route
name is changed first. If this is not what you want, then it is sufficient to press Enter again in
order to get to the waypoints. As described in the last paragraph, the additional WP can be
added or deleted now.
Deleting a Route:
You select the route to be deleted with the
or keys and press F2 (Del.Route). To be
on the safe side the Flytec 5030 GPS enquires once again: Delete Route? that can be
answered with Yes or No. However, it is not possible to delete the FAI-route.
Changing a route into Competition Route:
You select the route you want to be the Competition Route with the
keys and press
McC /Mrk. The display asks “copy to Competition route?” confirm with “yes”. Please note:
Start cylinder, cylinder radii and start time have to be set separately. As default all cylinder
radii are reset to 400 m .
35/53