Flytec 5030 v2.24 * - Manual (Page 10)

Flytec
5030 GPS
Pitch
Pitch, broken tone interval (see graphic below). The broken tone intervals increase in pitch
with height
In the basic settings it is possible to set the following thresholds
Sink tone thres.
Threshold The starting point can be chosen as in climb acoustic.
Audio thresh.
Threshold To avoid the climb acoustic starting on the ground or during very slow
climbs in flight, the starting point can be set from
0.02m/s to 0.2 m/s.
The warning sound for the stall alarm is a pitch tone of medium height with a very fast
interval rate and is always at full volume (100%). (Please, read 5.1 Stall Alarm)
McCready tone: When gliding with McCready sound activated, a tone is heard that
corresponds to the McCready ring value. This tone cannot be confused with the normal
ascent tone, as it has a pulse pause ratio of 1:4. (Please read 5.5 McCready Theory.)
The warning tone for a negative McCready Ring value is a deeper tone with a rapid
interval sequence, which tells the pilot to fly faster immediately.
All of the sound effects described here can be heard in the simulation mode.
1.8 User selectable fields
In the lower part of the display beside the compass rose are 7 user selectable fields which
can be used as the pilot desires. In total, there are about 22 measurement options available.
In order to assign a field, press the
arrow key. The description of the corresponding
display is highlighted by a black bar. Repeatedly pressing the key switches to the next
fields. The and arrow keys enable you to select the following measurement to be
displayed:
10/53