Horner APG QX651 OCS - Manual (Page 14)

PAGE 14 07 JUNE 2007 MAN0543-05
For detailed installation and a handy checklist that covers panel box layout requirements and minimum
clearances, refer to the hardware manual of the controller you are using. (See the Additional
References section in this document.)
• All applicable codes and standards need to be followed in the installation of this product.
• For I/O wiring (discrete), use the following wire type or equivalent: Belden 9918, 18 AWG or
larger.
Adhere to the following safety precautions whenever any type of connection is made to the module.
• Connect the green safety (earth) ground first before making any other connections.
• When connecting to electric circuits or pulse-initiating equipment, open their related breakers. Do
not make connections to live power lines.
• Make connections to the module first; then connect to the circuit to be monitored.
• Route power wires in a safe manner in accordance with good practice and local codes.
• Wear proper personal protective equipment including safety glasses and insulated gloves when
making connections to power circuits.
• Ensure hands, shoes, and floor are dry before making any connection to a power line.
• Make sure the unit is turned OFF before making connection to terminals. Make sure all circuits
are de-energized before making connections.
• Before each use, inspect all cables for breaks or cracks in the insulation. Replace immediately if
defective.
4 ADDITIONAL REFERENCES
The following table indicates the hardware manual numbers for the controller you are using. Hardware
manuals contain detailed installation, configuration and other pertinent information. See the Technical
Support section in this document for the web site address to download references and obtain revised
editions.
Additional References
Controller Manual Number
QX Series Hardware
e.g. HE-QX451, HE-QX551, HE-QX651, HE-QX500
MAN0798
NX Series Hardware
e.g. HE-NX220, HE-NX221, HE-NX250, HE-NX251
MAN0781
Operator Control Station Hardware (OCS, OCX)
e.g., OCS1XX / 2XX; Graphic QCS250
Remote Control Station Hardware
RCS (except RCS116), RCX (e.g., RCS210, RCS250)
MAN0227
Color Touch QX Hardware
e.g., OCS300, OCS 301, OCS 350, OCS 351
e.g., OCS 451, OCS 551, OCS 651
MAN0465
LX Series Hardware
e.g., LX-280 / LX-300; RCS116
MAN0755
MiniQX / MiniRCS / MiniOCX / MiniRCX Hardware
e.g., HE500QXxxx MAN0305
Other Useful References
CAN Networks MAN0799
Cscape Programming and Reference MAN0313
DeviceNet
™ Implementation SUP0326
Wiring Accessories and Spare Parts Manual MAN0347