Horner APG XLe OCS HE-XE102-10 - Manual (Page 2)

PAGE 2 21 AUGUST 2007 MAN0852-02
HE-XE102-10 Specifications / Installation
3
Panel Cut-Out and Dimensions
Note: Max. panel thickness: 5 mm.
Refer to XLE User Manual (MAN0805) for panel box information and
a handy checklist of requirements.
Note: The tolerance to meet NEMA standards is
± 0.005” (0.1 mm).
4
Ports / Connectors / Cables
Note: The case of the XLE is black, but for clarity, it is shown in a
lighter gray color.
3
.6
2
2
[
9
2
m
m
]
3.622 [92mm]
001XLE002
Power Connector
Power Up:
Connect to Earth Ground.
Apply 10 - 30 VDC.
Screen lights up.
CAN Connector
Use the CAN Connector when
using CsCAN network.
To Remove Back Cover:
Unscrew 4 screws located
on the back of the unit.
Lift lid.
CAUTION: Do not
overtighten screws when
screwing the lid back on.
I/O Jumpers: (Not Shown):
I/O Jumpers (JP) are located
internally. To access, remove
back cover of unit.
Wiring Connectors (J1 / J2):
I/O Jumpers (JP1 / JP2),
and External Jumpers (RS-
485) are described in the
Wiring and Jumpers section
of this document.
Memory Slot:
Uses Removable Memory
for
data logging, screen
captures, program loading
and recipes.
Horner Part No.: HE-MC1
Serial Communications:
MJ1: (RS-232 / RS-485) Use
for Cscape programming and
Application-Defined
Communications.
MJ2: (RS-232 / RS-485) Use
for
Application-Defined
Communications.
MJ1
(RS-232 / RS-485)
MJ2
(RS-232 / RS-485)
J1
I/O
Jumper
Memory Slot
001XLE029-R2
J2
I/O
Jumper
NET 1
(CsCAN)
Power
DIP
Switch