Videotec WASPT - Manual (Page 5)

Instruc
tions manual - English - EN
3
6 Assembling and installing
The assembly and installation must be
performed only by skilled personnel.
Before starting any operation, make sure
the power supply is disconnected.
6.1 Installation
6.1.1 Installing the pump tank
If using the pump at temperatures below
3°C (37.4°F) add some antifreeze liquid to
the water.
The antifreeze liquid will cause irreparable
damage to the germanium glasses. For
pan & tilts fitted with germanium glasses,
do not use antifreeze liquid but add ethyl
alcohol in 20% solution.
Attach the metal cage (01) firmly to a wall using the
holes provided for this (02).
01
02
Fig. 1 Water tank 5l (1.3gal), 5m (16ft) delivery.
01
02
Fig. 2 Water tank 23l (6gal), 5m (16ft) or 11m (36ft) delivery.
01
02
Fig. 3 Water tank 23l (6gal), 30m (98ft) delivery.
Take the plug out of the tank, along with any pumps
and level gauges. Remove the tank from the metal
cage.