Videotec WASPT - Manual (Page 10)

EN - English - I
nstruc
tions manual
8
Lock the nut to the coupling.
Fig. 15
Attach the pipe to the washer support using the
bracket (01), the screws (02) and the washers (03)
supplied.
Lock the coupling using the hoseclip (04) supplied
and connect the delivery hose (05).
01
02
03
04
05
Fig. 16
To calibrate the jet direct the nozzle towards the glass
of the housing.
Fig. 17
To start the washer refer to the pan & tilt manual.
6.1.6.1 Installation examples
Fig. 18 Example of installation with wall bracket.
Fig. 19 Pipe attached to the wall with a plate.