Vaisala vLog 4.4 User Manual
Page 56
Transferring Logger Files
50
7. Edit or confirm the description of the logger using a maximum of 40 char-
acters. The default entry for this field draws from the existing Description
in the logger’s memory (maximum 16 characters, see Configuring Data
Loggers on page 25). You can accept the default, or use the extra characters
to further describe the application or location of the data logger.
Note: Changing the description here does not modify the description in the
logger’s memory.
8. Edit or confirm the description of listed logger channels using a maximum
of 12 characters.
9. Click Next.
10. Accept the default name for the Logger file or click the Browse... button to
save the Logger file under a different name.
11. If you are not using the username and password option, proceed to step 13.
Most users will do this.
12. If vLog is configured to prompt for a username and password when trans-
ferring files (not recommended, but see page 48 for more), click Next, and
the following window opens.