Vaisala vLog 4.4 - Manual (Page 48)

Getting Started
42
8. To modify channel descriptions, select the Modify Description checkbox
for the channel to modify and enter a new description in the text box.
9. Click Setup Logger or Close to close without saving.
10. The Confirm System Time dialog appears, asking you to confirm the exact
time before clearing the logger. Click OK.
11. Confirm any changes to the description(s). Click OK.
12. A message appears showing the changes to be made, asking if you want to
continue. Click Yes.
Second and subsequent loggers if performing Batch Setup using only
one COM Port:
1. With the Logger Batch Setup dialog box still open, disconnect the current
logger from the logger cable and attach the next logger to be configured.
2. On the Logger Batch Setup window, change the logger or channel descrip-
tions if desired.
3. Click Setup Logger.
4. Confirm the changes to the logger and descriptions. Click OK.
5. A message appears showing the changes to be made, asking if you want to
continue. Click Yes.
6. The settings as specified will be applied to this logger.
7. Repeat from step 1 for all remaining loggers.
8. When all loggers have been setup, click View Report if desired, otherwise,
click Close.
Second and subsequent loggers if performing Batch Setup using multiple
COM ports:
1. The Confirm Description dialog box opens for the next COM port.
2. If this COM port is assigned to a logger you wish to setup with the same
Sample Timing settings as the first logger, skip to step 5. If this COM port
is not assigned to a logger you wish to setup, click Cancel.
3. A message appears, asking if you would like to abort the batch setup. Click
No.
4. Repeat from step 1 until you reach a COM port which is assigned to a log-
ger you wish to setup.
5. In the Confirm Descriptions dialog box, change the Logger and Channel
Descriptions as desired. Click OK.
6. A message appears showing the changes to be made, asking if you want to
continue. Click Yes.
7. Repeat from step 1 for all remaining loggers.
8. When all loggers have been setup, click View Report if desired, otherwise,
click Close.