Vaisala vLog 4.4 - Manual (Page 45)

Veriteq vLog 4.4 User’s Guide
39
5. For Timer Value, set the number of minutes or seconds you want the trans-
ducer to begin warming up before taking a sample. The default is 10 sec-
onds.
6. Click OK.
Configuring Data Logger Channels to Work with Thermocouples
This section applies only to those using Veriteq VL-1700 and SP-1700 Series
Loggers. Veriteq VL-1700 loggers work with various types of thermocouples
(E, J, K, R, S, and T). You need to configure your channel to specify the type
of thermocouple you are using.
To configure VL-1700 and SP-1700 loggers to work with thermocou-
ples:
1. In vLog, choose Logger>Setup.
2. From the Setup window, click Setup next to the channel to configure.
3. From the Setup Thermocouple Channel screen, select Enable Channel.
4. From the Display Method list, choose your thermocouple type.
5. Enter a description.