Vaisala MMT330 - Manual (Page 93)

Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 93
Table 19 Data Recording Commands
Command Description
DIR Display recorded files
PLAY [0 ... 21] [START END] Output recorded data file. Start and end times
can only be specified if the data logger
module is installed. The times must be given
in the following format: yyyy-mm-dd hh:mm:ss
DSEL Select data recording and display quantities.
DELETE Delete all data files, including the memory of
the optional data logger module
UNDELETE Recover the deleted files that have not been
overwritten
Table 20 Calibration and Adjustment Commands
Command Description
CRH Relative humidity calibration
CT Temperature calibration
FCRH Relative humidity calibration after sensor
change
CTEXT Give the text to calibration information field
CDATE Set the calibration date
ACAL Analog output calibration
Table 21 Setting and Testing the Analog Outputs
Command Description
AMODE View the analog output modes
ASEL Select the parameters for the analog outputs
ITEST Test the analog outputs
AERR Change the analog error output values
AOVER [ON/OFF] Extend analog output range by 10%
Table 22 Setting and Testing the Relays
Command Description
RSEL Set and view the relays
RTEST Test the relays