Vaisala MMT330 - Manual (Page 104)

User's Guide _______________________________________________________________________
104 __________________________________________________________________ M210764EN-F
HELP
Use the HELP command to list the commands. The available commands
are determined by the device configuration and installed options.
Example:
>help
? ACAL ADDR AERR ALSEL
ASEL CDATE CLOSE CON CRH
CT CTEXT DATE DELETE DIR
DSEL DSEND ECHO ERRS FCRH
FILT FORM HELP INTV ITEST
LIGHT LOCK MODBUS MODS PLAY
PRES R RESET SCOM SDELAY
SEND SERI SMODE SYSTEM TEST
TIME UNDELETE UNIT VERS XPRES
>
ERRS
Use the ERRS command to display transmitter error messages, see Table
29 on page 138.
Example (no active errors):
>errs
No errors
>
Example (showing active error):
>errs
Error: E2 Humidity sensor open circuit.
>
MODS
Use the MODS command to display information about the optional
modules that are connected to the transmitter.
Example:
>mods
Module 1 : WLAN-1 (POST: release_82000941_J; FW:
Version 82000977_K1 10/16/2008)
Module 2 : LOGGER-1 (1024 MB; HW: B; SW: 5)
>