Vaisala MMT330 - Manual (Page 102)

User's Guide _______________________________________________________________________
102 __________________________________________________________________ M210764EN-F
Example (enable standard filtering):
>filt on
Filter : ON
>
Device Information
Use the display/keypad or the serial line to display the device
information.
Press the INFO button in the basic display to see the following
information:
- Present or past unacknowledged errors, if any
- Device information
- Current date and time (only shown if data logger module installed)
- Adjustment information fed by the user
- Measuring settings
- Display Alarm settings
- Serial interface information
- Network settings and status of the LAN and WLAN interfaces
- Analog output information
- Relay output information (when applicable)
1104-127
Figure 57 Device Information on Display
Proceed in the information views by pressing the MORE button
repeatedly until you get the desired information. You can browse through
the information displays also with arrow buttons. Press OK to return to
the basic display.
?
Use the serial line command ? to check the current transmitter
configuration. Command ?? is similar but can also be used if the
transmitter is in POLL mode.