Vaisala PTB330TS - Manual (Page 33)

Chapter 3 ________________________________________________________________ Operation
VAISALA_______________________________________________________________________ 31
you may have to remove the PTB330 barometer from the tabletop case
to change the connector.
0812-016 Figure 11 Pressure Input Connectors
MI70 Indicator Settings
Before starting to use the PTB330TS, go through the user interface
settings of the MI70 indicator:
1. Turn on the MI70 indicator.
2. Open the Settings menu.
3. Select User Interface.
4. Set the interface options as desired. Use the arrow up and down
buttons to move the selection, and the shortcut buttons to change
the setting.
-
Language: Changes the language of the user interface. Note
that some menu entries and messages may still be in English
only.
-
Auto power off: The indicator can power off automatically
after 15 or 60 minutes of inactivity. The default is 15 minutes.
You can also disable the auto power off.
-
Program shortcut keys: If you wish to change the shortcut
button functions that are shown in the basic view, select this
option and follow the instructions. You can, for example,
replace the Hold/Sa button with the Chemical purge.