Vaisala HMDW110 - Manual (Page 32)

Syntax Description
form Show the currently used measurement
format.
form / Reset measurement format to default.
form [sss] Set a new measurement format.
sss = String consisting of modifiers and
abbreviations for measured parameters.
See the tables below. Maximum length 127
characters.
Example: show currently used measurement format (default format shown):
form
3.1 "T=" T " " U3 3.1 "RH=" RH " " U4 3.1 "Td=" Td " " U3 3.1 "Tw=" Tw
" " U3 4.1 "h=" h " " U7 \r \n
Output example:
send
T= 25.1 'C RH= 39.4 %RH Td= 10.3 'C Tw= 16.2 'C h=
45.1 kJ/kg
Example: set output format as RH and T, with start of text (ASCII character 002) and end of
text (003) ASCII codes, and without line feed and carriage return at the end:
form #002 3.1 "RH=" RH U4 3.1 "T=" T " " U3 #003
OK
Output example (ASCII codes not visible here):
send
RH= 39.3%RH T= 25.1 'C
Table 15 Form Command
Measured Parameter Abbreviation in Form Command
Temperature t
Relative humidity rh
Dewpoint td
Enthalpy h
Wet bulb temperature tw
Table 16 Output Parameters for Form Command
Modifier Description
x.y Length modifier (number of digits and decimal places).
\t Tabulator.
\r Carriage return.
\n Line feed.
\xxx ASCII character with decimal code xxx.
"" String constant.
Table 17 Modifiers for Form Command
30
4 Service Port