Line power led, Lan led – Agilent Technologies N8201A User Manual
Page 87
Front and Rear Panel Features
4
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
83
Line Power LED
The power indicator has the following states:
The green LED indicates when the downconverter standby switch is set to the on position.
The green LED is off when the switch is in the standby position.
The yellow LED indicates when the downconverter standby switch is set to the standby
position. The yellow LED is off when the switch is in the on position
LAN LED
The LAN LED indicator works in the following states:
State
Power Status
Illumination
OFF
No power connected to rear panel
None
Standby
Standby power. This is not a LINE
switch or power disconnecting device.
Solid amber
ON
Power is on
Solid green
State of the LAN
LAN Status
Illumination
ON
Normal operation
Solid green
ON
Device identity.
Blinking green
OFF
LAN error fault:
•
No valid or duplicate IP address
•
Unable to obtain or renew previously
obtained DHCP lease.
•
Disconnected LAN cable
Solid Red
OFF
This is the state when:
•
The system is initializing
or
•
A LAN reset has be initialized
None