Agilent Technologies N8201A User Manual
Page 62
58
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
2
Hardware Setup and Configuration
7
Click View & Modify LAN Config in the left-pane of the Web page. The following dialog
box should appear.
8
Click Modify Configuration to access the Password dialog.
9
Click Submit (accept the default password) and the following dialog box should appear.
The default password is set to “agilent”.
Tip: You can change the password from the View & Modify LAN Connections. (Scroll
down the Parameter column until you locate the Change Password parameter.)