Restart the computer – Agilent Technologies N8201A User Manual
Page 29
Software Installation
1
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
25
2
Follow the installation instructions and accept the default settings.
3
Click Finish.
4
Click Cancel on the Configure dialog box. This step will be completed later in the
process after restarting the computer.
5
Close the Agilent N8201A Performance Downconverter Software and Driver Installation
menu (driver_installation_list.pdf dialog box).
6
Click Exit CD-ROM. The software and driver installation is complete.
7
Restart the computer and continue to
“Hardware Setup and Configuration"
N O T E
Restart the computer!