Apple Mac mini Late 2009 (Technician Guide) - Manual (Page 81)

Mac mini (Late 2009) Take Apart — General Information 81 2009-11-03
General Information
General Tools
The following tools are required to service the computer:
ESD wriststrap and mat •
Tweezers •
Jeweler’s #0 Phillips screwdriver •
Jeweler’s #1 Phillips screwdriver •
Phillips #2 screwdriver •
Black stick (922-5065), or other nonconductive nylon or plastic tool •
Needlenose pliers •
Soft cloth (to protect removed parts from scratches) •
Screw tray •
Putty knife (922-6761),1.5 inch (38 mm) to open the top case •
Refer to the following Apple Knowledge Base article to purchase tools:
kBase #500200: Hand Tools for Desktop and Portable Repairs
Reassembly Steps
When there are no replacement steps listed, replace parts in the exact reverse order of the
Removal procedure.
Screw Sizes
All screw sizes shown are approximate and represent the total length of the screw.