DAVIS DriveRight 600E GD/HD Installation Guide (8126GD, 8126HD) - Manual (Page 5)

'ULYH5LJKW +' 0DJQHW
The DriveRight HD speed sensor magnet includes the following components.
See “Supplement for DriveRight HD” on page 20.
❏ Stainless Steel Cable Tie
❏ Stainless Steel Magnet Mount
❏ Magnet
❏ Neoprene Rubber Strip
$GGLWLRQDO 'RFXPHQWDWLRQ
Refer to the following documents for additional information on configuring and
using your DriveRight:
❏ The User’s Guide included with your DriveRight.
❏ The DriveRight Fleet Management Software (FMS) or Vehicle
Management Software (VMS) on-line help.
❏ The DriveRight FMS or VMS User’s Manual, provided in an Adobe
Acrobat PDF file in the DriveRight software program directory.
7RROV DQG 0DWHULDOV 1HHGHG
DriveRight installation may require some or all of the following tools and
materials. Please review the installation instructions and make sure you have all
necessary tools before proceeding with the installation.
I‚‡r) Additional tools may be required depending on your specific installation.
❏ Drill and drill bits:
• 7/64” or 2.5mm (pilot hole for #6 self-tapping screws)
• 3/16” or 5mm (pilot hole for 1/4” self-tapping screws)
• 5/16” or 8mm (clearance hole 1/4” bolts)
❏ Multimeter and/or test light
❏ Hacksaw
❏ Adjustable wrenches
❏ Vise
❏ Metal forming tools
❏ Metal forming tools
❏ Crimp tools
❏ Wire cutter
❏ Wire stripper
❏ Various screwdrivers
❏ Pliers
DriveRight Heavy Duty installation also requires one of the following tension tools
available from Davis Instruments or an equivalent tension tool. See “Supplement
for DriveRight HD” on page 20.
❏ Tension Tool for stainless steel cable tie, Æ' (%
❏ Deluxe Tension Tool for stainless steel cable tie, Æ' ($
07395.043 DR GD Inst Rev D Body D146.fm Page 3 Monday, December 1, 2003 12:02 PM