DAVIS DriveRight 600E GD/HD Installation Guide (8126GD, 8126HD) - Manual (Page 3)

,
1752'8&7,21
This manual provides installation instructions for the DriveRight 600 GD (General
Duty),
Æ' $%B9 , and DriveRight 600 HD (Heavy Duty), Æ' $%C9 . Since the
specific installation details vary quite a bit from one vehicle to another, these
instructions are intended to be a general guide for professional installers or for
knowledgeable and experienced mechanics.
We strongly recommend that you read the entire manual before beginning the
installation. Be sure you understand each procedure thoroughly before starting
that procedure.
&RPSRQHQWV
Your DriveRight should come with all of the components shown below. Make
sure you have all necessary components before proceeding with the installation.
&RQVROH 0RXQWLQJ %UDFNHWV
+DUGZDUH
I‚‡r) DriveRight hardware components include extra pieces not required for installation.
Mounting Bracket
Battery (CR123 3V Lithium) Visor Clip
Right Angle Adapter Bracket
Velcro® Tape (4 pair) Double-Sided Foam Tape (4 strips)
DriveRight Console
Tie Wraps (12)
1/2" Brass Hex Nuts (2)
3/8" Flat Washer
3/8" Internal Tooth Lock Washer
6-32 Nuts (3)
#6 Flat Washers (6)
#6 Split Lock Washers (6)
#14 x 3/4"
Self-Tapping Screws
(4)
#6 x 1/2" Pan Head
Self-Tapping Screws (3)
#6 x 1/2" Flat Head
Self-Tapping Screws (3)
6-32 x 1/2" Flat Head
Machine Screws (3)
1/4"-20 Nuts (5)
1/4" Split Lock Washers (5)
1/4" Flat Washers (5)
1/4-20 x 3/4" Hex Head
Machine Screws (5)
07395.043 DR GD Inst Rev D Body D146.fm Page 1 Monday, December 1, 2003 12:02 PM