DAVIS Wireless Wizard III & Monitor II - Manual (Page 5)

Assembling the Station Page 5
6. If all is well, re-attach the mounting base as shown below.
Use the standard setup unless you have the optional WeatherLink.
Note: As illustrated above, if you are using the WeatherLink in addition to the SensorLink Receiver,
you will need to position the receiver outside the mounting base.
Antenna
SensorLink
Receiver
Mounting Base
Weather Station
Console
To
Power
Adapter
SensorLink Receiver
(inside Console Base)
Power
Adapter
WeatherLink
(inside Console Base)
Power
Adapter
SensorLink
Receiver
WeatherLink
Connection
to Computer
WeatherLink
SensorLink
Receiver
Mounting Base
Weather Station
Console
To
Power
Adapter
110 VAC
Power Outlet
110 VAC
Power Outlet
WEATHERLINK SETUP
STANDARD SETUP