DAVIS Wireless Wizard III & Monitor II - Manual

Product # 7425W, 7425WM, 7425WS, 7425WSM, 7440W, 7440WM, 7440WS, 7440WSM
W
I R E L E S S
W
E A T H E R
S
T A T I O N
I N S T A L L A T I O N M A N U A L
This manual covers installation of the wireless weather station. Some fea-
tures discussed (such as barometric pressure and humidity) are only avail-
able with the Wireless Weather Monitor II
® . This manual also shows
installation with the solar power option, which may not be included in
your wireless weather station. Other manuals included with the station
cover the operation and maintenance of the console and sensors.
C OMPONENTS
The wireless weather station includes the following components. Please
make sure you have everything you need before beginning.
Wind Cups
Sensor Array
Extension
Tube
Power Adapter
2nd Power Adapter
(not supplied with
solar-powered
stations)
Weather Station Console
Anemometer
1-1/8"
Saddles
5/16" Flat Washers
5/16" x 1-1/2"
U-Bolt
5/16" Lock Washers
5/16" Hex Nuts
5/16" x 3"
Lag Screws
5/16"
Flat Washers
Cable
Tie
Allen
Wrench
3 Volt Lithium
Transmitter Battery
(not supplied with
solar-powered
stations)
#8 x 3/4"
Pan Head Screws
(for mounting Console)
Debris Screen
(place inside
Rain Collector Cone
after installation)
This hardware
comes installed
on Sensor Array:
#12 x 1-1/2"
Pan Head Screw
#12 Lock Washer
#12 Hex Nut
Rain
Collector
Field Case