DAVIS Weather Echo/Echo Plus (7602, 7603) - Manual (Page 2)

Page 2 Weather Echo
The Echo and Echo Plus communicate on one of 8 different ID codes. This
allows you to operate multiple systems in the same geographic area.
The receiver operates on a low power frequency that does not require you to have a FCC
license.
C OMPONENTS
I NSTALLATION S TEPS
The Echo and Echo Plus come pre-assembled; all you need to do is to set up
and install your display. Here are the steps you need to follow:
1. Install the battery, page 3.
2. Attach the power adapter (Echo Plus only), page 4.
3. Mount the display, page 5.
4. Set the transmission ID to the host station transmission ID, page 4.
5. Choose the screen units, page 10.
6. Set up the display, page 10.
Wall Mounting Bracket
Echo or Echo Plus Display
Battery (CR123 3V Lithium)
110 VAC Power Adapter
(Echo Plus only)
#6 x 1/2" Self-Tapping Screws (2)
Adjustable Stand
Cable Tie
Cable Tie
Mount